Sensing Technologies.com > About Us
A division of Micro Control Systems

Magnum Firmware

Magnum Firmware V17

Important: VERSION 17 FIRMWARE MUST USE VERSION 17 CONFIGURATION FILES.
It will NOT work with configuration files designed for Magnum firmware versions 14 and lower. Also, you MUST always use the latest MCS-Connect and MCS-Config programs.

MAGSOFT HVAC

Please Note: This file contains the latest official version 17 firmware release for the Magnum for HVAC applications. To load the firmware into a Magnum, first download (Save) the above file to your computer, run it by clicking on the downloaded file to extract the hex file, and then use MCS-Connect to upload the hex file to the Magnum.

HVAC Firmware
VG17.98S3
(2,590 KB)

MAGSOFT CENT

Please Note: This file contains the latest official version 17 firmware release for the Magnum for centrifugal applications. To load the firmware into a Magnum, first download (Save) the above file to your computer, run it by clicking on the downloaded file to extract the hex file, and then use MCS-Connect to upload the hex file to the Magnum.

CENT Firmware
17.98S
(1,770 KB)

MAGSOFT REFR

Please Note: This file contains the latest official version 17 firmware release for the Magnum for centrifugal applications. To load the firmware into a Magnum, first download (Save) the above file to your computer, run it by clicking on the downloaded file to extract the hex file, and then use MCS-Connect to upload the hex file to the Magnum.

REFR Firmware
17.98S
(1,751 KB)

MAGSOFT CPM

Please Note: This file contains the latest official version 17 firmware release for the Magnum for centrifugal applications. To load the firmware into a Magnum, first download (Save) the above file to your computer, run it by clicking on the downloaded file to extract the hex file, and then use MCS-Connect to upload the hex file to the Magnum.

CPM Firmware
17.98S
(1,770 KB)
ARCHIVED FIRMWARE
RELEASE NOTES